Print this page

Meeting Growing Wood Demand with Limited Trucking Capacity

by  Shawn Baker, Vice President of Research Forisk Consulting

This article was previously published in the Q2 2019 Forisk Research Quarterly; reprinted here with permission.

Forisk forecasts that an additional 3 BBFT of sawmill capacity is scheduled to come online in the South over the next three years. Given current limits on trucking capacity, how do we move an additional 13 million tons per year? One load at a time, of course. However, the idea of hiring 800 more truck drivers seems daunting in the current labor market. So, can the industry better utilize the drivers we currently have to meet the demand?

If every truck currently hauling logs picked up two more loads per month, the problem would be solved. Unfortunately, sawmill expansions are not evenly distributed across the South. They are tied to specific locations. If they locate in wood basins with trucking capacity constraints, incremental improvements in utilization will fail to solve the problem.

If we operated in an ideal world, where every truck is always either loaded or on its way to reload, then the wood supply system is strung tight. In reality, the wood supply chain is not great at trucking. Production swings wildly because of weather, breakdowns, quotas, etc. At times, we could operate with 5,000 fewer drivers, and at other times 5,000 more would feel insufficient. Today, there is a logger somewhere sitting idle, unable to haul. Ideally, they would make up that lost production when conditions improve. The challenge of constrained trucking capacity is there is no ability to “surge” in production to make up for lost days.

Figure 1. Example Impact of Improved Efficiency in Hauling


Trucking cannot be viewed as a necessary evil, and solutions are no longer simple. Asking drivers to add hours to supplement lost trucking capacity is not a solution. Hauling inefficiency (in woodyards and in-the-woods) remains common. Inefficiencies cost the entire supply chain. A logger or mill that takes 20 minutes longer than average to turn trucks adds an hour a day to every truck. If drivers average 2.2 loads and 11 working hours per day, that extra hour costs 0.2 loads per day or a load a week. Figure 1 above demonstrates that such an impact can amount to 30 million tons of additional wood if applied to every driver. That would feed a lot of sawmills.

The wood supply chain must consider multi-faceted solutions to the problem. There is no silver bullet.

  1. Take care of current drivers. The first, and most important, step is to retain the capacity we have. Truck drivers currently have other options. Salaries, benefits and quality of life are all areas that affect decisions to leave a current job.
  2. Ruthlessly evaluate your operations. Inefficiency multiplies throughout our system. When trucking is the bottleneck, any negative impacts to trucks affect cost and productivity of all links in the supply chain.
Hire whenever possible. In the current job environment, there are not a lot of qualified, quality employees sitting at home. Always be open to opportunities, wherever you hear about them.
Monday, 09 December 2019 16:01